Languages
Русский
Українська
Польский
Английский

Modern coating machines, which you can profitably buy from us, are used for the production of round products and the application of a special surface curing shell on them. Such coating machines are suitable for making jelly beans from kernels of rice, rice grains, sunflower seeds, wheat, and corn. The technology of their production consists of the stage of increasing the form of dragee and its subsequent pouring with a special layer. Prepared semi-finished products are poured in with an enveloping compound quickly and evenly. Speed ​​indicators at this stage drazhirovochnyh machines can be adjusted depending on the characteristics of the final product. The semi-finished product for glazing is placed in the drum unit. Next is served fine additive in bulk form, which affects the taste of the finished product. In a special container for liquid products, oil or syrup, depending on the production technology. In some coating machines there is an additional crusher, which allows you to load not only icing sugar, but also sugar itself, which in this tank is crushed to a state of powder. In some designs of the coating machines, droppers are used for the same purpose. The number of additional components is determined in advance by the calculation method. Experienced technologists will be able to competently design a coating machine and think it over to the last detail. The uniformity of mixing, the speed and frequency of rotation of the internal blades of the device depend on the selected parameters of the parts. On average, the coating process takes 6-7 minutes. After that, the finished product is discharged into a separate container, packed and marketed with the help of finishing packaging. Bottles, bags, boxes are used for these purposes. A drum-type draining machine has several functional zones. The drum inside can have a corrugated appearance. A syrup is sent to the first zone of the coating machine, which immediately enters the second zone, where the material is processed with air and dried. Also here goes the fat mixture. In the third zone of the coating machine, the almost finished dragee is sprinkled with special talcum powder to prevent sticking to each other. The stainless steel of the coating machine prevents changing the composition of the finished products. In addition, the stainless steel from which the coating machines are made, easy to maintain, allows you to quickly clean the structure after use.

 

Dragee machine. Drazer drum Copper drum, drum pan.

 

The machine drazherovochnaya designed to cover the glossy shell of various products: nuts, pastries, coffee beans, sugar, icing, fondant, vitamin-fruit mixtures and so on.
 
We offer 2 versions:

 

дражировочная машина дражировочная машина
stainless steel from Czech copper m1
Price 43000 uah Price 67000 uah

 

Modern drazherovochnye machines, which you can profitably buy from us, are used for the production of round products and the application of a special surface freezing shell on them. Such coating machines are suitable for making jelly beans from kernels of rice, rice grains, sunflower seeds, wheat, corn. The technology of their production consists of the stage of increasing the form of dragee and its subsequent pouring with a special layer.
 
Prepared semi-finished products are filled with an enveloping composition quickly and evenly. Speed ​​indicators at this stage drazhirovochnyh machines can be adjusted depending on the characteristics of the final product.
 
The semi-finished product for glazing is placed in the drum unit. Next is served fine additive in bulk form, which affects the taste of the finished product. An oil or syrup is placed in a special container for liquid products, depending on the production technology. In some coating machines, there is an additional crusher, which allows you to load not only sugar, but also sugar itself, which in this tank is crushed to a state of powder.
 
For the production of sweet sticks from corn, a special additional pump with nozzles is needed in the set, through which the oil is supplied. In some designs of coating machines, droppers are used for the same purpose.
 
The number of additional components is determined in advance by the calculation method. Experienced technologists will be able to competently design a coating machine and think it over to the last detail. From the selected parameters of parts depends on the uniformity of mixing, speed and frequency of rotation of the internal blades of the device.
 
On average, the coating process takes 6-7 minutes. After that, the finished product is discharged into a separate container, packed and marketed with the help of finishing packaging. For these purposes, use bottles, bags, boxes.
 
The drum coating machine has several functional zones. The drum inside can have a corrugated appearance.
 
A syrup is sent to the first zone of the coating machine, which immediately enters the second zone, where the material is processed and dried. Also here goes the fat mixture. In the third zone of the coating machine, the practically prepared dragee is sprinkled with special talcum powder to prevent sticking to each other.
 
Stainless steel coating machines prevents the change in the composition of finished products. In addition, the stainless steel from which the coating machines are made, easy to maintain, allows you to quickly clean the structure after use.
 
Let's make volume and working weight under your order.
 
Hot air blowing and tilting of the boiler are possible to unload the product.
 
Drum drazhirovochny inclined for the production of dragee.
 
Inclined draping drum is designed for panning of vitamin-confectionery products of rounded shape at the enterprises of the pharmaceutical and confectionery industry. Covering with dark and white chocolate, yogurt, etc.
 
Technical characteristics of the coating machine:
 
Maximum drum load, kg 100
Diameter of the drum, mm 950
Solid drum construction
Material drum copper
Boiler rotation frequency, rpm 15-40
Variable speed adjustment
Rotation direction left-right
The time of discharge of the product from the drum (maximum), min. 2
Drum tilt time by 90 °, sec. ten
Installed power, 1.5 kW