Stainless steel tanks have long and successfully been used for food storage, for fermentation of alcoholic beverages, for chemical liquids and much more. “Wind rose” is specially ready for you to develop and manufacture containers of stainless steel of any volume and shape. We have rich experience in the production and installation of stainless steel tanks for large enterprises, as well as for small private industries and home use.
Among the stainless tanks offered on our website, everyone will find the most suitable for themselves. But if among the finished standardized products you have not found one that fully meets your production needs, we will be happy to manufacture any stainless steel container at our production for you in an extremely short time and at a reasonable price.
The stainless steel tanks created by us are an example of high-quality production, because we make them from excellent stainless steel from the best European manufacturers.
The stainless steel that we use for the manufacture of containers has a number of important advantages: it can withstand large mechanical loads, has high anti-corrosion properties, does not respond to the influence of aggressive chemical environments, is not subject to large temperature extremes and atmospheric phenomena, has a long service life, and most importantly - is a neutral material that does not change the taste, color and smell of liquids, which is very important for the storage and transportation of food.
In our assortment there are almost all used containers made of stainless steel: for the production of kvass, mash, wine and fruit drinks, tanks for the preparation and storage of beer with a conical bottom (CCT), containers for storing water and chemical products, tanks for baths, tanks for transportation and storage of liquids, etc.
At the request of the customer, we can produce containers not only with single-layer, but also with multi-layer walls - such containers are often used in the food industry, when products need heat treatment. Multilayer tanks are created by the type of "thermo-shirts", which allows you to maintain the desired temperature for a long time.
We also create additional equipment for our stainless steel food containers: mixing devices for tanks, “shirts” for cooling and heating, washing heads, hatches, inspection openings, temperature sensors and much more. Our highly qualified technologists and engineers will create any capacity of stainless steel according to your individual order in full accordance with your needs, and the master-assemblers will assemble and install the finished product quickly and efficiently.
Mankind has long learned to collect, store and move water or liquids. Different capacities, from plastic cups to huge tanks for storing oil, are used by people for domestic and industrial purposes.
But the most famous material for them is stainless steel, which has huge advantages over other materials. Unlike glass, plastic, ceramics, black iron, it is appropriate to say about the main characteristics that put these products in the first place.
The strength of the "stainless steel", able to withstand huge mechanical loads. The inert properties of the steel remain so in aggressive liquids. During transportation, you don’t have to worry about structural damage, and, accordingly, about the loss of water or liquid.
Tightness is much higher for containers made of stainless steel; containers made of other materials are less reliable. Intensive operation does not affect the "life" of life as much as with other materials. Corrosion resistance against external atmospheric influences.
Stainless steel tanks, stainless steel tanks, tanks and cisterns. Capacitive equipment.
We are always surrounded by water or various kinds of liquids. We are used to storing, transfusing, moving liquids in containers that are made of various materials: ceramics, glass, plastic, metal. There are a lot of forms for liquid containers - these can be bottles, cans, barrels, tanks, rectangular or round containers.
For all occasions, a person came up with tanks for water, oil, milk, juices, etc. etc. But, probably, constructions made of stainless steel stand apart. Capacities made of such material are in constant demand among buyers. In terms of their mechanical and physico-chemical characteristics, products made from stainless steel are several times superior to their "brothers in the shop."
Regardless of the geographical region where such products are used, an ordinary buyer always "votes in rubles" for them. Stainless steel tanks in Kiev have long won their place among household goods, in all enterprises of the food, chemical industry, where there are aggressive liquids. These include stainless steel tanks, stainless steel tanks, stainless steel tanks.
AISI 304 steel has excellent resistance to general corrosive environments, but is not recommended where there is a risk of intergranular corrosion. They are well adapted for operation in fresh water and urban and rural atmosphere. In all cases, regular cleaning of the external surfaces is necessary to maintain their original condition..
Prices for stainless steel tanks:
|V m³||ø mm||Cylinder height, mm||Total height, mm||Price in Euro|
AISI 304 brand has good resistance to various acids:
- phosphoric acid in all concentrations at ambient temperature,
- nitric acid up to 65%, between 20 and 50 ° C,
- formic and lactic acid at room temperature,
- acetic acid between 20 and 50 ° C.
They are recommended for use in contact with cold or hot foods, such as wine, beer, milk (fermented milk products), alcohol, natural fruit juices, syrups, molasses, etc.
Higher chemical resistance in AISI 316 L. stainless steel.
Comparative characteristics of the use of stainless steel Grades AISI 304 and AISI 316L.
|Reagent||AISI 304||AISI 316L|
|Acetic acid 30%||v||v|
|Acetic acid 80%||x||v|
|Alcohol (methyl or ethyl)||v||v|
|Sugar beet juice||v||v|
|Chromic acid 50%||x||x|
|Chromic acid 10%||v||v|
|Formic acid 90%||x||v|
|Hydrogen peroxide 90%||v||v|
V - recommended
O - there are restrictions
X - not recommended
Stainless steel, which is obtained by alloying additives, has huge advantages over other materials.
It makes sense to dwell on some of them:
Durable and hard material that can withstand enormous mechanical stress.
The chemically inert properties of steel allow you to confidently "work" in aggressive liquid environments.
During transportation, you don’t have to worry about structural damage, and, accordingly, about the loss of water or liquid. Tightness is much higher for containers made of stainless steel; containers made of other materials are less reliable.
The service life is higher than other products.
Corrosion resistance - reliable protection against external atmospheric influences.
You can still cite many positive qualities of stainless steel products, which do not have other similar household or industrial products. Now, when the question is more about quality, which is equivalent to the “longevity” of the product, stainless steel tanks in Kiev are especially appreciated by ordinary people.
"Roza Vetrov" group of companies makes custom-made stainless steel tanks, aluminum containers of any shape and volume to order. The shortest time and affordable price are guaranteed.
Stainless steel tanks
Windrose manufactures stainless steel tanks of various volumes for use in the food and chemical industries - from small kegs to huge stainless tanks and tanks. We can also offer a complete set of stainless steel equipment for making beer, designed for both small private mini-breweries and industrial breweries and breweries.
A rich assortment of stainless steel containers is offered by Windrose for the food industry. These are containers for drinking water, fresh milk and sour-milk products, for wine, food alcohol, fruit juices, syrups, yeast, molasses and many other products.
Our containers are made of the highest grade food grade steel, which is a chemically neutral material that allows you to preserve the natural taste and smell of food. If necessary, we create airtight containers so that the product in them does not have contact with air and does not oxidize.
The manufacture of stainless steel tanks in the “Wind Rose” takes place in a comprehensive way - we create not only the tanks themselves, but also provide them with all the necessary additional equipment in accordance with the functions performed. Our tanks immediately after manufacture are ready for active and long-term operation.
Buying stainless steel tanks at Windrose will be beneficial for many reasons:
We make stainless containers from the highest quality steel produced in Germany, which by all chemical and physical indicators is the best material for the preservation of food products.
We also create tanks for the chemical industry that have high resistance to aggressive fluids - various alcohols and acids, withstand large temperature extremes and enormous mechanical loads.
Our high-tech production allows us to create reliable, safe and convenient stainless steel tanks with a long service life.
We are ready to make stainless tanks of any volumes and dimensions in full accordance with the wishes of the customer, on an individual project.
Our experienced specialists provide comprehensive customer service: from the project of the facility to turnkey delivery. All stages of the technological process of creating stainless steel tanks, assembly and on-site installation are controlled by qualified specialists, which eliminates the possibility of errors and defects.
The cost of our stainless steel tanks is significantly lower than that of competitors, so our products are not only high quality, but also inexpensive.
We have been working in the market of stainless steel products for more than 10 years, so we value our name and guarantee the excellent quality, high functionality and reliability of our stainless steel tanks.