Hand rolls for sheet metal are very popular on the equipment in great demand. The rolls have a surface rounded shape and are used to perform operations that allow you to attach a similar configuration of metal products.

Bending rolls necessarily used in the manufacture of pipes for the installation of gutters, chimneys, kozhuhnyh elements of thermal insulation systems.

Varieties of rolling machines

Rolled sheet metal on rollers facilitates the processing of metal products.

The enterprises engaged in the production of such structures in the shops set three roll mills, and even four-high. The shafts are located at the bottom and the top of the play the role of the drive. They must be installed at a distance that is equal to the density of the processed metal sheet, it eliminates shifts. Distance roller arrangement for sheet metal rolling, controlled by the movement of the shaft, located at the bottom. This operation can be performed manually.

metal-roll processing in the rolling machines - it is an intermediate stage between a sharp metal blank and its profiling. From the location of the shafts relative to each other affects the diameter of the finished part. In most cases, these machines are installed, cast iron rolls, but there are steel. From the fortress and fitting of rolling units to each other depends on the optimal operation of the equipment. From a material having a sheet form, a cylindrical surface is formed, it becomes possible due to sweep through the trees which are located asymmetrically.

Edit sheet metal on rollers allows to manufacture metal parts with roll-formed configuration.

Rollers are indispensable for the installation of communication systems. Such machines are actively involved for the production of various forms of metal intended for the engineering and aviation spheres. With rolls of sheet metal made conical, cylindrical, arched parts, align slabs, buckle edge.

Buy rollers in Ukraine at a good price you can in the campaign "Rose of the Winds".

You can buy hand rolls PRINZING RM.

вальцы PRINZING RM

Download instruction

Prinzing RM 30/33 - 3375 €

The Prinzing RM 30/33 rollers with manual drive at a working length of 330 mm are designed for cylindrical and conical bending of low-carbon steel sheet up to 1.0 mm thick with a minimum diameter of 45 mm. As standard, the shafts have a strength of 700 N / mm2, but can additionally pass bulk or surface hardening and have an increased hardness, ground surface. Shafts can also be covered with rubber. The upper shaft can have a rebated bending groove, and the lower and back mortar grooves for the wire. The rollers with manual drive Prinzing RM 30/33 are a simpler and cheaper machine than the electro-drive, but retain all the main characteristics: drive to the working shafts either directly or through a downshift, asymmetric shaft arrangement, top shaft with a flap and the ability to rotate during the removal of parts, the tapering of the parts by mounting at an angle of the rear shaft, adjustment-stop for cone molding (optional), fast installation of the lower shaft, precise installation with digital indication the spindle shaft with the help of a spindle and worm gear. Rolls can additionally be completed with a stand frame.

Download instruction

Prinzing RM 30/53 - 3440 €

The Prinzing RM 30/53 rollers with manual drive with a working length of 530 mm are designed for cylindrical and conical bending of low-carbon steel sheet up to 0.6 mm thick with a minimum diameter of 45 mm. As standard, the shafts have a strength of 700 N / mm2, but can additionally pass bulk or surface hardening and have an increased hardness, ground surface. Shafts can also be covered with rubber. The upper shaft can have a rebated bending groove, and the lower and back mortar grooves for the wire. The rollers with manual drive Prinzing RM 30/53 are a simpler and cheaper machine than the electro-drive, but retain all the main characteristics: drive to working shafts either directly or through a downshift, asymmetric shaft arrangement, top shaft with a flap and the ability to rotate during the removal of parts, the tapering of the parts by mounting at an angle of the rear shaft, adjustment-stop for cone molding (optional), fast installation of the lower shaft, precise installation with digital indication the spindle shaft with the help of a spindle and worm gear. Rolls can additionally be completed with a stand frame.

Download instruction

Prinzing RM 42/53 - 3680 €

The Prinzing RM 42/53 rollers with a manual drive with a working length of 530 mm are designed for cylindrical and conical bending of low-carbon steel sheet up to 1.0 mm thick, making shells and cones with a minimum diameter of 63 mm. As standard, the shafts have a strength of 700 N / mm2, but can additionally pass bulk or surface hardening and have an increased hardness, ground surface. Shafts can also be covered with rubber. The upper shaft can have a rebated bending groove, and the lower and back mortar grooves for the wire. The Prinzing RM 42/53 hand-operated rollers are a simpler and cheaper machine than the electro-drive, but retain all the main characteristics: drive to working shafts either directly or through a downshift, asymmetric shaft arrangement, top shaft with a flap and the ability to rotate during the removal of parts, the tapering of the parts by mounting at an angle of the rear shaft, adjustment-stop for cone molding (optional), fast installation of the lower shaft, precise installation with digital indication the spindle shaft with the help of a spindle and worm gear. Rolls can additionally be completed with a stand frame.

Download instruction

Prinzing RM 52/53 - 3830 €

The Prinzing RM 52/53 with manual drive with a working length of 530 mm is designed for cylindrical and conical bending of low-carbon steel sheet up to 1.5 mm thick, making shells and cones with a minimum diameter of 78 mm. As standard, the shafts have a strength of 700 N / mm2, but can additionally pass bulk or surface hardening and have an increased hardness, ground surface. Shafts can also be covered with rubber. The upper shaft can have a rebated bending groove, and the lower and back mortar grooves for the wire. The Prinzing RM 52/53 hand-operated rollers are a simpler and cheaper machine than the electro-drive, but retain all the main characteristics: drive to working shafts either directly or through a downshift, asymmetric shaft arrangement, top shaft with a flap and the ability to rotate during the removal of parts, the tapering of the parts by mounting at an angle of the rear shaft, adjustment-stop for cone molding (optional), fast installation of the lower shaft, precise installation with digital indication the spindle shaft with the help of a spindle and worm gear. Rolls can additionally be completed with a stand frame.

Download instruction

Prinzing RM 52/103 - 4700 €

The Prinzing RM 52/103 rollers with manual drive at a working length of 1030 mm are designed for cylindrical and conical bending of low-carbon steel sheet up to 1.2 mm thick, making shells and cones with a minimum diameter of 78 mm. As a standard, inexpensive heat-treated and precision shafts have a strength of 700 N / mm2, but can additionally undergo surface hardening and have an increased hardness, ground surface. The upper shaft can have a rebated bending groove, and the lower and back mortar grooves for the wire. The Prinzing RM 52/103 hand-operated rollers are a simpler and cheaper machine than the electro-drive, but retain all the main characteristics: manual drive to the working shafts through downshifting, asymmetric shaft arrangement, top shaft with a flap and the ability to rotate when removing parts, tapering the parts by installing at an angle of the rear shaft, adjusting the stop for cone molding (optional), fast installation of the lower shaft, precise installation with digital indication of the rear shaft and by means of the lead screw and worm gear.

Download instruction

Prinzing RM 52/128 - 6650 €

The rolls Prinzing RM 52/128 with manual drive with a working length of 1280 mm are designed for cylindrical and conical bending of low-carbon steel sheet up to 0.9 mm thick, making shells and cones with a minimum diameter of 78 mm. The basic equipment includes inexpensive heat-treated precision shafts with a strength of 700 N / mm2, but additionally, the shafts can undergo surface hardening and have increased hardness, polished surface. The upper shaft can have a rebated bending groove, and the lower and back mortar grooves for the wire. Rolls with manual drive Prinzing RM 52/128 are a simpler and cheaper machine than the electro-drive, but retain all the main characteristics: manual drive to the working shafts through a downshift, asymmetric shaft arrangement, top shaft with a flap and the ability to rotate when removing parts, tapering the parts by installing at an angle of the rear shaft, adjusting the stop for cone molding (optional), fast installation of the lower shaft, precise installation with digital indication of the rear shaft and by means of the lead screw and worm gear. Stand-base is included in the basic equipment.

Download instruction

Prinzing RM 60/103 - 5320 €

The Prinzing RM 60/103 rollers with a manual drive with a working length of 1030 mm are designed for cylindrical and conical bending of low-carbon steel sheet up to 1.5 mm thick, making shells and cones with a minimum diameter of 90 mm. In the basic configuration have not expensive heat-treated and precision shafts with a strength of 700 N / mm2, but can additionally undergo surface hardening and have increased hardness, ground surface. The upper shaft can have a rebated bending groove, and the lower and back mortar grooves for the wire. The Prinzing RM 60/103 hand-operated rollers are a simpler and cheaper machine than the electro-drive, but retain all the main characteristics: manual drive to the working shafts through downshifts, asymmetric shaft arrangement, top shaft with a flap and the ability to rotate when removing parts, tapering the parts by installing at an angle of the rear shaft, adjusting the stop for cone molding (optional), fast installation of the lower shaft, precise installation with digital indication of the rear shaft and by means of the lead screw and worm gear.

Download instruction

Prinzing RM 60/128 - 6950 €

The Prinzing RM 60/128 rollers with manual drive with a working length of 1280 mm are designed for cylindrical and conical bending of low-carbon steel sheet up to 1.2 mm thick, making shells and cones with a minimum diameter of 90 mm. The basic equipment includes inexpensive heat-treated precision shafts with a strength of 700 N / mm2, which can additionally undergo surface hardening and have an increased hardness, ground surface. The upper shaft can have a rebated bending groove, and the lower and back mortar grooves for the wire. Rollers with manual drive Prinzing RM 60/128 are a simpler and cheaper machine than the electro-drive, but retain all the main characteristics: manual drive to the working shafts through downshift, asymmetric shaft arrangement, top shaft with a folding bolt and the ability to rotate when removing parts, tapering the parts by installing at an angle of the rear shaft, adjusting the stop for cone molding (optional), fast installation of the lower shaft, precise installation with digital indication of the rear shaft and by means of the lead screw and worm gear. The basic equipment of the machine includes a stand-stand.

Download instruction

Prinzing RM 60/153 - 7820 €

The Prinzing RM 60/153 rollers with a manual drive with a working length of 1530 mm are designed for cylindrical and conical bending of low-carbon steel sheet up to 0.8 mm thick, making shells and cones with a minimum diameter of 90 mm. The basic set of rolls includes inexpensive heat-treated precision shafts having a strength of 700 N / mm2, which can additionally undergo surface hardening and have an increased hardness, ground surface. The upper shaft can have a rebated bending groove, and the lower and back mortar grooves for the wire. The rollers with manual drive Prinzing RM 60/153 are a simpler and cheaper machine compared to the electro-drive, but retain all the main characteristics: asymmetric shaft arrangement, top shaft with a folding gate and the ability to rotate during the removal of parts, tapering parts for the account installation at an angle of the rear shaft, adjustment for the cone-shaped molding (optional), manual drive to the working shafts through a downshift, fast installation of the lower shaft, precise installation with digital indication of the rear shaft and by means of the lead screw and worm gear. The basic equipment of the machine includes a stand-stand.

Download instruction

Prinzing RM 70/103 - 6650 €

The Prinzing RM 70/103 rollers with a manual drive with a working length of 1030 mm are designed for cylindrical and conical bending of low-carbon steel sheet up to 1.8 mm thick, making shells and cones with a minimum diameter of 105 mm. The basic set of rolls includes inexpensive heat-treated precision shafts having a strength of 700 N / mm2, which can additionally undergo surface hardening and have an increased hardness, ground surface. The upper shaft of the machine can have a rebated bending groove, and the lower and back mortar grooves for the wire. The Prinzing RM 70/103 hand-operated rollers are a simpler and cheaper machine than the electro-drive, but retain all the main characteristics: asymmetric shaft arrangement, top shaft with a folding gate and the ability to rotate when removing parts, tapering parts for the account installation at an angle of the rear shaft, adjustment for the cone-shaped molding (optional), manual drive to the working shafts through a downshift, fast installation of the lower shaft, precise installation with digital indication of the rear shaft and by means of the lead screw and worm gear. The basic equipment of the machine includes a stand-stand.

Download instruction

Prinzing RM 70/153 - 9720 €

The Prinzing RM 70/153 rollers with manual drive with a working length of 1530 mm are designed for cylindrical and conical bending of low-carbon steel sheet up to 1.2 mm thick, making shells and cones with a minimum diameter of 105 mm. The basic set of rolls includes inexpensive heat-treated precision shafts having a strength of 700 N / mm2, which can additionally undergo surface hardening and have an increased hardness, ground surface. The upper shaft of the machine can have a rebated bending groove, and the lower and back mortar grooves for the wire. The rollers with manual drive Prinzing RM 70/153 are a simpler and cheaper machine than the electro-drive, but retain all the main characteristics: asymmetric shaft arrangement, top shaft with a folding gate and the ability to rotate when removing parts, tapering the parts for the account installation at an angle of the rear shaft, adjustment for the cone-shaped molding (optional), manual drive to the working shafts through a downshift, fast installation of the lower shaft, precise installation with digital indication of the rear shaft and by means of the lead screw and worm gear. The basic equipment of the machine includes a stand-stand.

Download instruction

Prinzing RM 70/203 - 11050 €

The Prinzing RM 70/203 rollers with manual drive with a working length of 2030 mm are designed for cylindrical and conical bending of low-carbon steel sheet up to 0.8 mm thick, making shells and cones with a minimum diameter of 105 mm. The basic set of rolls includes inexpensive heat-treated precision shafts having a strength of 700 N / mm2, which can additionally undergo surface hardening and have an increased hardness, ground surface. The upper shaft of the machine can have a rebated bending groove, and the lower and back mortar grooves for the wire. The Prinzing RM 70/203 hand-operated rollers are a simpler and cheaper machine than the electro-drive, but retain all the main characteristics: asymmetric shaft arrangement, top shaft with a folding bolt and the ability to rotate during the removal of parts, tapering parts for the account installation at an angle of the rear shaft, adjustment for the cone-shaped molding (optional), manual drive to the working shafts through a downshift, fast installation of the lower shaft, precise installation with digital indication of the rear shaft and by means of the lead screw and worm gear. The basic equipment of the machine includes a stand-stand.

Download instruction

Prinzing RM 85/103 - 12890 €

The Prinzing RM 85/103 rollers with manual drive with a working length of 1030 mm are designed for cylindrical and conical bending of low-carbon steel sheet up to 2.5 mm thick, making shells and cones with a minimum diameter of 125 mm. The basic set of rolls includes inexpensive heat-treated precision shafts having a strength of 700 N / mm2, which can additionally undergo surface hardening and have an increased hardness, ground surface. The upper shaft of the machine can have a rebated bending groove, and the lower and back mortar grooves for the wire. The rollers with manual drive Prinzing RM 85/103 are a simpler and cheaper machine than the electro-drive, but retain all the main characteristics: asymmetric shaft arrangement, top shaft with a folding shutter and the ability to rotate during the removal of parts, the cone-shaped parts for the account installation at an angle of the rear shaft, adjustment for the cone-shaped molding (optional), manual drive to the working shafts through a downshift, fast installation of the lower shaft, precise installation with digital indication of the rear shaft and by means of the lead screw and worm gear. The basic equipment of the machine includes a stand-stand.

Download instruction

Prinzing RM 85/153 - 14930 €

The Prinzing RM 85/153 rollers with manual drive with a working length of 1530 mm are designed for cylindrical and conical bending of low-carbon steel sheet up to 1.8 mm thick, making shells and cones with a minimum diameter of 125 mm. The basic set of rolls includes inexpensive heat-treated precision shafts having a strength of 700 N / mm2, which can additionally undergo surface hardening and have an increased hardness, ground surface. The upper shaft of the machine can have a rebated bending groove, and the lower and back mortar grooves for the wire. The Prinzing RM 85/153 hand-operated rollers are a simpler and cheaper machine than the electro-drive, but retain all the main characteristics: asymmetrical shaft arrangement, top shaft with a folding gate and the ability to rotate during the removal of parts, tapering parts for the account installation at an angle of the rear shaft, adjustment for the cone-shaped molding (optional), manual drive to the working shafts through a downshift, fast installation of the lower shaft, precise installation with digital indication of the rear shaft and by means of the lead screw and worm gear. The basic equipment of the machine includes a stand-stand.

Download instruction

Prinzing RM 85/203 - 16980 €

The Prinzing RM 85/203 rollers with manual drive with a working length of 2030 mm are designed for cylindrical and conical bending of low-carbon steel sheet up to 1.2 mm thick, making shells and cones with a minimum diameter of 125 mm. The basic set of rolls includes inexpensive heat-treated precision shafts having a strength of 700 N / mm2, which can additionally undergo surface hardening and have an increased hardness, ground surface. The upper shaft of the machine can have a rebated bending groove, and the lower and back mortar grooves for the wire. Rollers with manual drive Prinzing RM 85/203 are a simpler and cheaper machine compared to the electro-drive, but retain all the main characteristics: asymmetric shaft arrangement, top shaft with a folding gate and the ability to rotate during the removal of parts, tapering parts for the account installation at an angle of the rear shaft, adjustment for the cone-shaped molding (optional), manual drive to the working shafts through a downshift, fast installation of the lower shaft, precise installation with digital indication of the rear shaft and by means of the lead screw and worm gear. The basic equipment of the machine includes a stand-stand.

СDownload instruction

Prinzing RM 100/103 - 15340 €

Rolls Prinzing RM 100/103 with manual drive with a working length of 1030 mm are designed for cylindrical and conical bending of low-carbon steel sheet up to 3.2 mm thick, making shells and cones with a minimum diameter of 150 mm. The basic set of rolls includes heat treated precision shafts with a strength of 700 N / mm2, which can additionally pass through surface hardening and have an increased hardness, ground surface. The upper shaft of the machine can have a rebated bending groove, and the lower and back mortar grooves for the wire. Rollers with manual drive Prinzing RM 100/103 are a simpler and cheaper machine than electro drive, but retain all the main characteristics: asymmetric shaft arrangement, top shaft with a folding bolt and the ability to rotate during the removal of parts, the cone-shaped parts for the account installation at an angle of the rear shaft, adjustment for the cone-shaped molding (optional), manual drive to the working shafts through a downshift, fast installation of the lower shaft, precise installation with digital indication of the rear shaft with the aid of a lead screw and a worm gear. The basic equipment of the machine includes a stand-stand.

Download instruction

Prinzing RM 100/153 - 17800 €

The Prinzing RM 100/153 rollers with a manual drive with a working length of 1530 mm are designed for cylindrical and conical bending of low-carbon steel sheet up to 2.4 mm thick, making shells and cones with a minimum diameter of 150 mm. The basic set of rolls includes heat treated precision shafts with a strength of 700 N / mm2, which can additionally pass through surface hardening and have an increased hardness, ground surface. The upper shaft of the machine can have a rebated bending groove, and the lower and back mortar grooves for the wire. Rollers with manual drive Prinzing RM 100/153 are a simpler and cheaper machine compared to the electro-drive, but retain all the main characteristics: asymmetric shaft arrangement, top shaft with a folding gate and the ability to rotate during the removal of parts, tapering parts for the account installation at an angle of the rear shaft, adjustment for the cone-shaped molding (optional), manual drive to the working shafts through a downshift, fast installation of the lower shaft, precise installation with digital indication of the rear shaft with the aid of a lead screw and a worm gear. The basic equipment of the machine includes a stand-stand.

Сownload instruction

Prinzing RM 100/203 - 19850 €

The Prinzing RM 100/203 rollers with a manual drive with a working length of 2030 mm are designed for cylindrical and conical bending of low-carbon steel sheets up to 1.8 mm thick, making shells and cones with a minimum diameter of 150 mm. The basic set of rolls includes heat treated precision shafts with a strength of 700 N / mm2, which can additionally pass through surface hardening and have an increased hardness, ground surface. The upper shaft of the machine can have a rebated bending groove, and the lower and back mortar grooves for the wire. The Prinzing RM 100/203 hand-operated rollers are a simpler and cheaper machine than the electro-drive, but retain all the main characteristics: asymmetric shaft arrangement, top shaft with a folding gate and the ability to rotate during the removal of parts, tapering parts for the account installation at an angle of the rear shaft, adjustment for the cone-shaped molding (optional), manual drive to the working shafts through a downshift, fast installation of the lower shaft, precise installation with digital indication of the rear shaft with the aid of a lead screw and a worm gear. The basic equipment of the machine includes a stand-stand.

The lineup	RM20	RM30	RM42	RM52	RM60	RM70	RM85	RM100
Effective length max [mm]	330	530	1030	1280	1530	2030	2030	2030
Sheet thickness max [mm]	0,6	1	1	1,5	1,5	1,8	2,5	3,2
Diameter of rolls [mm]	20	30	42	52	60	70	85	100

Электро механические вальцы PRINZING RME позволят увеличить производительность вашего производства и наладить серийный выпуск продукции.

Prinzing RME - Three roller rollers with electric drive have proven for decades their high flexibility and reliability for professional craft and industry.

The bending process is carried out by the electric drive of the upper and lower shaft. The single-stage engine operates via a double foot switch for driving forward and backward. Adjustment of the required bending diameter is carried out manually with the help of the adjusting screw of the rear shaft and equipped with a measuring scale. In the fully automatic version of the machine, the rear shaft is also equipped with a drive.

The diameter of the roll ranges from 20 mm to 120 mm and a length of just over 200 mm to about 2.5 m.

The rollers are arranged asymmetrically. Quick and easy removal of finished pipes is ensured by a quick-detachable shaft fixation. Depending on the diameter, the rolls have a spherical shape. The machine can also be equipped with hardened, ground or rubberized shafts.

The lineup	RME20	RME30	RME42	RME52	RME60	RME70	RME85	RME100	RME120
Effective length [mm]	330	530	1030	1280	1530	2030	2030	2030	2539
Sheet thickness max [mm]	0,6	1	1	1,5	1,5	1,8	2,5	3,2	3,5
Diameter of rolls [mm]	20	30	42	52	60	70	85	100	120

The rolls of the Prinzing trade mark differ from the analogues by the exact shaping of the pipe, the ideal rounding of the metal, which makes it possible to produce pipes that are optimally suitable for the subsequent welding of the butt to the joint. Since it is very important that when the two ends of the pipe are brought together, no gaps remain either along the edges or in the middle.

This allows you to weld pipes, including thin-walled, without additives and to obtain excellent product quality. In addition, the counter, located on the right side of the rollers, makes it possible to quickly select the necessary clearance between the rollers for each required pipe diameter. A convenient clamping, as well as an easily open upper shaft clamp, allows the finished pipe to be extracted very quickly.

An experienced tinsmith will say that these rolls take into account everything necessary to ensure the speed and quality of production. To ensure the ideal rollout and the ability to work with mirror surfaces and copper, you can order the option of polished shafts, and for working at the thickness limit, the option of the rooted shafts.

Rollers are so easy to handle that you can train them quickly enough. After all, all adjustment is made with just one handle on the digital indicator of the gap counter. Unlike many others where the shaft is exposed from two sides.

You can get acquainted with the work of the rolls in our production, where you can visually demonstrate their advantages, and you can also make a pipe sample.

Contact technical questions by phone. (044) 383-73-63

Hand-rolling units are successfully used for the processing of soft metals. Devices with manual control make the operation of the units more safe.

In addition to manually operated rollers, there are machines with electric drive. In models with the electric drive necessarily there is a brake. Electromechanical machines are used for large production volumes. Rollers for metal with electric drive operate from the electrical voltage and release the operators monitoring the operations performed with the help of this equipment from physical activity. Electromechanical rollers for sheet metal are devices operating due to rotation used for cold processing of sheet metal blanks.

Large machines controlled by automatics, themselves put the shafts in the desired position, adjusting them to the desired thickness of the metal sheet and the configuration of the workpiece. From overload the equipment is protected by a special electronic system.

There are also hydraulic rollers - there are three types of this equipment.

Manual rollers are cheaper than analogs with electric drive - this is ideal for small production. With the help of a hand roller, it is possible to carry out constant monitoring of the production process. Such machines are used even for the processing of precious metals.

Rollers in Ukraine are exploited at many enterprises working in the field of production of metal structures.

Thanks to the special arrangement of the rolling units, the bending of the metal workpieces is carried out neatly and without much effort, the parts are given the required configuration. Due to the rolling machines, the time for such operations is reduced, the probability of producing defective products is reduced to a minimum.

Our company specializes in the sale of rollers, designed for bending sheet metal. Here you can buy rolls in Ukraine at a democratic cost. We offer reliable and durable equipment for the processing of rolled metal at reasonable prices.